SD-0150

SD-0150

ACRYLONITRILE BUTADIENE STYRENE(ABS)

Product Description

General Purpose ABS, SD – 0150 grade, is a rigid thermoplastic with good processing characteristics. It is a high flow injection molding grade with considerable impact strength and medium heat deflection.

Applications:

This grade is intended for a wide range of applications including:

• auto parts,
• home appliances,
• electrical parts/fittings,
• Telecommunication and electronic devices.

Typical Data :

Density of this grade is approximately1.04 gr/cm³.

Shrinkage of all ABS grades in mold is approximately 0.3 % ~ 0.6 % (ASTM D 955).

All tests are carried out at 23 ºC unless otherwise stated.

The above data are typical laboratory average. They are intended to serve as guide only.

Processing Condition :

SD – 0150 ABS granules absorbs moisture from atmosphere, with a rate depending on temperature and humidity. It is recommended that the material be dried in a dehumidifying dryer at 80 °C to 85 °C for 2-4 hours, prior to use.

Processing temperatures are recommended to be set at 190°C- 230 °C for cylinder, and 40 °C to 80 °C for mold. SD-0150 ABS can be processed under different conditions based on machinery available and articles molded.