GPPS 1038
General purpose polystyrene GPPS 1038 is manufactured by continuous mass polymerization of styrene monomer.
GPPS 1038
General purpose polystyrene, Extrusion and Molding
Product Description
General purpose polystyrene GPPS 1038 is manufactured by continuous mass polymerization of styrene monomer.
It is a crystal-like , its suitable for use on its own or in blends with impact poly styrene both for extrusion and injection molding.
Applications:
It is recommended for manufacture of packaging applications and house hold applications and petri dishes And XPS sheets and plates
| properties | unit | value | ASTM method |
| physical | |||
| Melt flow rate @200 C & 5 kg load | g/10min | 3.1 | D1238 |
| Mechanical properties | |||
| Tensile strenght | Mpa | 55 | D638 |
| Flexural modulus | Mpa | 3100 | D790 |
| Charpy impact strength | Kj/m² | 10 | D256 |
| Thermal properties | |||
| Vicat softening point @120 C,1 kg(min) | C | 101 | D1525 |
Note: All mechanical properties measured under standard conditions 50% RH and 23C.
Packing:
GPPS 1038 is supplied in the form of cylindrical of approximately 2.5×2.5 mm. the material can be supplied in either 25 kg bags.
Regulatory information:
It is responsibility of the manufacturers of food contact articles and industrial food packers to make sure the article in their actual use are in compliance with the imposed migration requirements.
| MFI (dg/min): | 3.1 ( 200°C / 5 Kg) |
|---|---|
| Application(s): | It is recommended for food contact consumer good, cups and other products by in line extrusion and |
TDS : Download
MSDS: Download
